From the same category
Product Description
Characteristics
At the foot of the Mont-Blanc, our team of enthusiasts designed this waterproof jacket to protect you during your regular mountain walks.
Product Benefits
-
WaterproofProtects from storms 3 layer membrane, 15000 mm Schmerber
-
Breathability29 cm side openings and component that wicks away perspiration (RET=6)
-
LightweightOnly 574 gr in size L
-
Freedom of movementStretch fabric with 13% elastane for freedom of movement
-
Anatomic designDrawcord at the jacket hem, adjustable sleeves with coverage, adjustable hood.
-
Pockets2 zipped hand pockets, 1 zipped inside pocket, 1 inside pocket
-
Compact designLightweight, compressible fabric to save weight and space in a backpack
Product feature
-
CutSlim fit with raglan sleeves and good stretch properties for plenty of freedom of movement during your hikes. A warm layer, such as a fleece or light padded jacket, can be worn underneath.
-
Product design: our expertiseOur Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.
-
We have reduced our environmental impact on this productThis jacket optimises the consumption and weight of the main component. This reduces the environmental impact of this product. We have reduced the CO2 impact by 31% compared to the previous product.
-
HoodAdjustable height with an elastic cord and tightening toggle. Integrated semi-rigid visor to provide high level protection. The small detail that makes the difference: a triangular opening on the side of the hood for better visibility to the sides.
-
Main component3-layer component with membrane
-
MEMBRANEThe waterproof rating of a product depends on the following two main criteria: its component and its construction. This product was made with a membrane. This is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being flexible, lightweight and breathable.
-
LAYER DESIGN3 layer design: The membrane is glued between the outer and inner fabric. We use it for durable and high-performing jackets
-
COMPONENT WATERPROOFINGLaboratory tests are conducted to guarantee the waterproof rating of a component. This is done by measuring the fabric's resistance to water pressure expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. This product's component has a 15,000 mm waterproof rating and can withstand the pressure of a 15,000 mm water column. This is also equivalent to 15000 Schmerbers.
-
Water resistance of the jacketWe conduct laboratory tests that simulate rainfall scenarios in order to guarantee the jacket's waterproof rating. This garment has been validated in a shower test under 100 L/sqm/hr of water for 3 hours. This test reproduces the average conditions of a mountain storm.
-
BREATHABILITYComponent breathability is measured by its thermal evaporative resistance (RET). This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin. The lower the RET, the more breathable the fabric. RET ≤ 6: very breathable fabric RET ≤ 12: breathable fabric RET ≤ 20: not very breathable fabric This product was assessed at 6 RET
-
HOW TO RESTORE THE WATER-REPELLENT PROPERTIESA fabric is water repellent when it allows water slide over its surface without seeping in. The fabric does not soak up water and therefore remains lightweight and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the garment. The water-repellent property can be reactivated by putting the jacket in the tumble dryer for 10 minutes on low heat. You can also use the waterproof spray (ref 855490)
Product testing
-
CompositionMain fabric 71% Polyamide, 29% Polyester Membrane 100% Polyurethane Pocket 74% Polyester, 26% Elastane
-
Quality checkTo meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their developm...
-
StorageAlways make sure this waterproof jacket is completely dry before storing it.
-
Product benefitsA waterproof, lightweight and breathable jacket. Its membrane protects you from the rain and wind in the mountains.
-
TestsOur Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. As well as numerous field tests, we test products in a laboratory according to the desired properties (e.g.: shower test fo...
Customers Also Viewed
Product reviews
Delivery / Return policy
| 1. Shipping Guide |
|
| 2. Returns / Exchanges |
You can apply for a return or exchange within 7 days from the reception of the item, by contacting the customer center (1800-2025). Shipping fee (return/exchange)
|
| 3. Free size exchange service |
|
| 4. Precautions |
|
Compulsory Product Information
| Product Material | See page content |
| Color | See page content |
| Dimension | See page content |
| Country of manufacture | |
| Washing instructions and handling precautions | See page content |
| A/S Person in charge and telephone number | 데카트론 온라인 고객센터(상품/주문/배송문의) : 1800-2025 |