From the same category
Characteristics
Warm and comfortable, functional jacket to enjoy your skiing in the best conditions.
Product Benefits
-
WarmthWadding for insulation.
-
WaterproofCORRECT: 3000 mm-rated coating and partially-taped seams.
-
BreathabilityBreathable fabric.
-
Pockets4 pockets: 2 hand, 1 ski pass, 1 inner.
-
Ease of useMagnetic fabric flap to protect the top of the jacket zip from bad weather.
-
RobustnessDurable component and overstitched seams. Excellent stability after washing.
-
Water repellentWater-repellent outer fabric that does not get waterlogged.
-
AdjustableAdjustable jacket hem and cuffs, removable synthetic fur hood.
-
User comfortSoft, warm collar for protection and comfort.
Product feature
-
What type of padding is used to provide warmth?To help to keep you warm, we use recycled wadding insulation (60 g/m² on the arms and 100 g/m² on the body). This synthetic polyester-based wadding traps more or less air, depending on the size of its fibres, to insulate you from the cold.
-
How to dress to stay warm on the slopes?To make sure you stay warm and dry, we recommend using the 3-technical-layer rule: - Layer 1 or a second skin, to stay dry. - Layer 2 or an insulating layer, to keep the heat in. - Layer 3 or a protective layer to protect against the elements.
-
How can I prevent snow from getting in when I fall?The adjustable jacket hem and elastic sleeve cuffs keep out snow and draughts while skiing, and especially in case of a fall.
-
A score for comparing products' environmental impactThe environmental impact of the product is calculated over its entire life cycle and using various indicators. An overall ABCDE score is given to help you easily identify products with the best environmental performance by comparing products of the same type (t-shirts, trousers, backpacks, etc.). Decathlon is committed to displaying the environmental information of its products. For more information: http://sustainability.decathlon.com/
-
Which components are added to the padding give it warmth?As well as its filling, your jacket's waterproof zips, collar, hem tightening and adjustable cuffs offer better protection against the cold and damp for a warmer feeling.
-
"Coated" jacket: what are the advantages of this coating?The coating is a waterproofing material spread over the inner surface of a fabric. It prevents water from seeping into the garment but allows the water vapour produced by the body's physical activity to escape. So you stay dry for greater comfort while practising your sport.
-
How is the water resistance of a jacket measured?The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A fabric with a waterproof rating of 5,000 mm is therefore resistant to the pressure exerted by a 5,000 mm column of water.
-
Which parts of the jacket protect me from bad weather?The 150 jacket was rigorously developed and assembled to stop water getting in and to prevent wind chill, so you can brave the bad weather (rain, snow, wind, etc.). We validated the waterproofing of this product in the field in various weather conditions for several days.
-
What is the water repellent feature of my jacket for?The water-repellent property of a fabric is its capacity to allow water to run off its surface without seeping in. This jacket features water-repellent components that extend its weather resistance. The fabric is made water-repellent by treating its outer surface. However, this property may deteriorate with use.
-
How do I restore my jacket's water-repellent properties?Bear in mind that the water repellent feature can be reactivated. To do this, put the jacket in the dryer on a synthetic programme for 10 to 15 minutes. You can also use a waterproofing spray (sold in our stores): spray the product evenly over the entire garment, then leave it to dry for 10 to 12 hours).
-
What is a "breathable" jacket?This garment wicks away the water vapour produced by your body when exercising. To see if a fabric is breathable, its resistance to evaporative heat (RET) is measured in a standardised ISO 11092 test. The lower the RET, the more breathable the fabric. The 150 jacket has a RET of 7. However, it is the technical solutions (zips, vents, mesh) that Wedze uses, which reduce the condensation inside the garment and maximise breathability.
-
What is the cut of the 150 jacket?REGULAR fit. The jacket has sides that fall straight and remain parallel rather than trying to follow the shape of your body. The interior volume means this jacket can be worn in combination with a first and second technical layer.
Product testing
-
CompositionMain lining 100% Polyester Padding 100% Polyester Main fabric 100% Polyester Synthetic fur 90% Acrylic, 10% Polyester Coating 100% Polyurethane
-
StorageStore on a hanger and do not fold, as this can damage the fabric coating. Dry thoroughly before storing in a dry and well-ventilated place.
-
Product benefitsImproved waterproofness thanks to taped main seams to keep you dry in bad weather.
-
TestsAll Wedze products are conceived, designed and developed in the Mont Blanc Valley. They are then tested under the same conditions as you would experience in real-life use (snow, cold, powder snow, etc). The design teams make sure that the programme fo...
Customers Also Viewed
Product reviews
Delivery / Return policy
| 1. Shipping Guide |
|
| 2. Returns / Exchanges |
You can apply for a return or exchange within 7 days from the reception of the item, by contacting the customer center (1800-2025). Shipping fee (return/exchange)
|
| 3. Free size exchange service |
|
| 4. Precautions |
|
Compulsory Product Information
| Product Material | See page content |
| Color | See page content |
| Dimension | See page content |
| Manufacturer and importer | Decathlon SE |
| Country of manufacture | China |
| Washing instructions and handling precautions | See page content |