Characteristics
We developed these advanced-level snowboarding boots focusing on foot support to go faster on hard slopes and in powder snow.
Product Benefits
-
FitErgonomic 15 mm foam heel wedge: good foot support at high speed.
-
AdjustableThe “Dual-Dial habu®FitSystem” ensures micro-adjustment on 2 areas.
-
RigidityRigid flex (8/10) for board steering precision at high speed.
-
RepairFree wheel and laces replacement for habu®: habufit.com/support
-
Thermal insulationEVA sole, 80% air to insulate from cold ground.
-
Fitting comfortFirm foam with a good balance of comfort and support. Thermoformable liner.
-
TractionUltralight sole with large studs for good grip on all types of snow
-
CushioningUltralight EVA sole, 80% air for lightweight and cushioning.
Product feature
-
A word from the product manager3rd version of the All Road 900 already. We have kept its stiffness, which makes it the main feature, but we have also increased the support with two new features: 1. liner fastening thanks to a fabric lining that attaches to the shoe, 2. new lacing system with the Dual-Dial Focus®. Thank you very much for your opinions which allow us to improve our models for the pleasure of all of us.
-
2. Ergonomic Heel Pad ankle foamThe ankle bone padding fills the hollow under and behind the ankle to hold the heel firmly in place. The level 3/3 liner contains a foam made in an exclusive Dreamscape material and shape: - the shape is based on an average of 40 foot scans. It is perfect for holding the foot tightly and adapts to everyone - the material: a soft but firm elastomer foam. You can feel the support as soon as you slip your feet inside. And when you ride, there are no hard points.
-
3. 2-point + strap liner tighteningOn this liner, we kept just 2 points of tightening with the laces: - at the instep, - above the ankle bone. At the top of the boot, we replaced the 3rd lacing point with a powerful tightening strap. We therefore reduced the friction of the laces (2 points instead of 3) and focused the tightening force to provide heel support. On the upper part, the strap locks the liner even more tightly to the shin.
-
4. between the liner and boot thanks to the fabric built into the shoeThe liner in the Endzone boots is surrounded by textile inner lacing with 900 point tightening. This concept spreads the tightening force evenly around the foot, for good foot stability in the boots.This support system also prevents the liner from slipping inside the boots, in thin, to increase foot support.
-
5. 3D insole for a snug fitThe insole of this boot is 3 dimensional. This sole is pre-shaped at the heel and arch of the foot to help prevent the foot from moving inside the boot. It offers comfort and thermal insulation. If you feel you need to maintain your foot more securely in the liner, there is another alternative: get a sole that can be thermoformed to suit your foot. This is the most effective solution.
-
Sole: grip, traction, cushioning and thermal insulationOur Ultralight sole is 100% EVA. EVA is a very light material with 80% air. This formulation is designed to resist abrasion while keeping its damping properties. It is naturally very insulating and protects against the cold rising from the ground. We designed in large studs to offer you very good grip. Sufficiently far apart from each other, they help get rid of the snow.
-
How can I be sure it's the right size?1. Put the boot on 2.Tighten the boot 3. Stand upright 4. Your big toes should just touch the tip of the boot without causing unpleasant pressure 5. Bend your legs forward, your big toes move backwards and no longer touch the end of the boot.
-
Separate tightening system - 2 zonesThe "habu®FitSystem Dual-Dial Focus™” configuration of the dual-dial allows the rider to fully control the adjustment of the boot in two separate areas, to better steer the board: _ 1 wheel which serves as a millimetre at the bottom of the boot ensuring maximum control of the foot, _ 1 dial which is used at the top of the boot and allows you to personalise the stiffness of your boot.
-
habu® Fit SystemThe habu® fItsystem combines three important technical elements to transform the snowboard experience: 1) the innovative innovative wheel ensures micro-adjustment and precision, 2) the habu® cable is light, but very durable with 75 stainless steel strands. 3) low friction habu® guides ensure uniform pressure distribution whilst minimising wear and long lifespan.
-
How to repair the habu®FitSystemSupplied by BOA Technology, the wheels and the laces of the adjustment system have undergone thousands of hours of rigorous tests in the lab and in the field, and are guaranteed to prolong the life of the boot on which they are built into. After-sales service is guaranteed on the website habufit.com/support
-
Boot flex/stiffnessThe All Road 900 flex is rigid (8/10). Compared to the All Road 500, it has better board steering on hard slopes at full speed and is more solid on landing from big jumps. The uncoupled clamping lets you: - fasten tighter to stiffen the boot (for piste, freeride or freestyle jump) - loosen to soften the boot (for use on quiet slopes or freestyling: flat, jib).
-
Adding Flex UpThe Flex Up makes the boot stiffer by around 2 points of flex out of 10 (with the flex up, the All Road 900 has a stiffness of around 10/10). It is a 100% recycled plastic accessory insert in the tongue of the Decathlon snowboard boots, from the 2022/23 season. (A pocket is provided so that it is well positioned in height and sideways). The Flex Up makes sense over time: When the boot becomes softer, give it a second life!
-
Heel support: level 3(/3) linerFoot support is essential when snowboarding to steer your board (such as foot in the boot or liner in the boot). The level 2 liner applies 5 advantages: 1. thermoformable liner from home 2. Ergonomic Heel Pad foam 3. 2-point liner tightening + a strap on the shin 4. link between the liner and the shoe thanks to a textile sheet attached to the shoe 5. 3D insole to better fit the foot
-
1. Thermoforming the liner by yourself / WARNINGTHERMOFORMING IS ONLY POSSIBLE IN BUILT-IN OVENS MEASURING 56 x 60 x 56 cm WITH A FAN MODE. DO NOT TRY ON A GAS OVEN OR A SMALL TABLE TOP OVEN WITH VISIBLE HEATING ELEMENTS.
-
1. Thermoforming the liner independently / INSTRUCTIONS FOR USE1. Heat your oven to 80°C in convection mode 2. Remove the inner soles from the liners, place the liners on the oven plate covered with a piece of baking paper 3. Wait 15 mins 4. Put the socks back on, put them on with a pair of ski-snowboard socks and tighten them (not too much) 5. Put on the boots on and tighten fully 6. Wait for 15 minutes when static. This operation can be repeated if necessary.
Product testing
-
CompositionUpper of 80% Polyurethane, 20% Polyester Outer sole of 100% Foamed EVA Lining and sock of 100% Polyester
-
Quality checkSupplied by BOA Technology, the wheels and the laces of the adjustment system have undergone thousands of hours of rigorous tests in the lab and in the field, and are guaranteed to prolong the life of the boot on which they are built into. After-sales...
-
StorageAt the end of the day, remove the liners from the uppers to improve ventilation and dry quickly. Also, remove the inner sole from the liner to dry fully in one night.
-
Product benefitsFor riders who demand precision and agility when hitting big kickers and top speeds. A rigid-flex and secured heel for optimum support, and dual-dial tightening so you can fully customise the fit.
-
TestsAll Decathlon's Snowboarding products are tested in real conditions of use for which they were designed. Under the snow, in the cold, in all weather conditions when snowboarding on powder, in the snowpark, or on the runs. Our design teams, product man...
Customers Also Viewed
Product reviews
Delivery / Return policy
| 1. Shipping Guide |
|
| 2. Returns / Exchanges |
You can apply for a return or exchange within 7 days from the reception of the item, by contacting the customer center (1800-2025). Shipping fee (return/exchange)
|
| 3. Free size exchange service |
|
| 4. Precautions |
|
Compulsory Product Information
| Product Material | See page content |
| Color | See page content |
| Dimension | See page content |
| Country of manufacture | |
| Washing instructions and handling precautions | See page content |