From the same category
Product Description
Characteristics
These are waterproof shoes that have been designed to be best suited to occasional hikes in the mountains. Designed at the foot of the Mont Blanc!
Product Benefits
-
TractionNon-slip rubber outsole with 4mm gripping studs.
-
Impact protectionDurable rubber guard to the forefoot.
-
WaterproofWaterproof and breathable membrane lining: your feet dry for 3h in all weather
-
CushioningFull-length cushioning thanks to an EVA midsole
-
Lightweight337 g in size 6
Product feature
-
WHAT IS YOUR HIKING FREQUENCY AND INTENSITY?We have classified our products in terms of performance and features for 3 levels of Mountain Walking: - occasional: about 10 hikes per year of about 3 to 4 hours in length, covering less than 10km and less than 700m in elevation gain. - Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km, 700 to 1200m of elevation gain per outing. - Intensive: more than 20 times a year. More than 6 hours, more than 20 km, 1200 to 2000m of elevation gain per outing.
-
FIELD TESTSAll our shoes are tested for initial comfort and comfort in use by hikers (who do not work for Decathlon) under the same conditions you will encounter yourself when hiking. The aim is to further develop the product and validate it as objectively as possible, for your greatest satisfaction.
-
Lab testsFurther laboratory tests were conducted to test the following elements: attachment of eyelets and webbing, assembly, toxicology, UV resistance, sole and upper component abrasion, accelerated ageing.
-
SUSTAINABLE DEVELOPMENT INFORMATIONFor the inner sole fabric coating of these boots, we dye the thread during manufacturing to reduce the environmental impact. Textile dyeing requires a lot of water but also produces waste water from the dye baths. To reduce this environmental impact, we use a mass pigmentation process that involves adding the colour pigments when the yarn itself is produced.
-
SOLE WITH GRIPThe grip of our soles is certified. To be awarded certification, the boots must pass laboratory tests to assess the grip rate on different surfaces (Smooth, Rugged, Dry, Wet). To validate these tests, we assess the quality of our soles in the field, in the mountains, by a panel of representative testers over 500 km
-
Waterproofing testIn a laboratory, the boot is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test we can determine a time and number of km that the boot can walk while staying dry. Then we confirm in the field or under the rain, that the shoe meets its promises.
-
Making waterproofing last longerTo keep your feet dry, we advise you to use a gaiter or mini-gaiter to protect the top of your boots and prevent water and also pebbles and sand from getting in We advise re-waterproofing your boots twice a year using a re-proofing agent (search for ‘waterproofing’ on our decathlon website) which will help you restore the original water-repellent qualities and fight against stains on the outside.
-
Which size should I select?‘The most important thing is to try on several styles of boots to find the one most suited to you! You can take a size above your usual one to prevent the toes from bumping into the toe box when going downhill, provided the foot is properly supported to avoid friction. Tip: keep your toenails short and, before descending, check that your lacing prevents your foot from sliding forwards inside the shoe."
-
BUYING TIPS / HOW DO YOU TRY YOUR BOOTS ON?Some Decathlon stores have a test route. 1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces, taking care to correctly balance the tightening. 3. Check two points: - the heel does not come up before the boot when you walk uphill. - the foot does not slide and the toes do not press against the front when going downhill. 4. Try on several sizes and models. Break them in gradually to adapt them to your foot.
-
Optimise the capabilities of your boots: replace your insoles!The original insole in your boots is designed to accommodate most feet. A change of insole can bring: 1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide heat and/or cushioning. 3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.
-
HOW DO YOU AVOID BLISTERS?Discover all our tips here: https://conseilsport.decathlon.fr/conseils/9-astuces-pour-eviter-les-ampoules-tp_10725
Product testing
-
CompositionOuter sole of 70% Synthetic Rubber, 30% Ethylene Vinyl Acetate Upper of 60% Polyester, 20% Polyurethane, 20% Leather - Bovine - Split Lining and sock of 80% Polyester, 10% Polyamide, 10% Polyurethane
-
StorageStore in a well-ventilated dark, dry place.
-
Product benefitsWalk comfortably in the mountains with these waterproof shoes, providing cushioning and protection for your feet. The stone-guard protects your toes, while the waterproof membrane keeps your feet dry.
-
TestsAll our boots are tested for initial comfort and comfort in use by hikers from outside Decathlon under the same conditions you find in use. The aim is to test, develop and confirm the product in the most objective way possible, so you can get maximum ...
Customers Also Viewed
Product reviews
Delivery / Return policy
| 1. Shipping Guide |
|
| 2. Returns / Exchanges |
You can apply for a return or exchange within 7 days from the reception of the item, by contacting the customer center (1800-2025). Shipping fee (return/exchange)
|
| 3. Free size exchange service |
|
| 4. Precautions |
|
Compulsory Product Information
| Product Address | See page content |
| Color | See page content |
| Size Foot length(mm) Heel height(cm) | See page content |
| Manufacturer, Importer | Decathlon SE |
| Country of manufacture | China |
| Handling Precautions | See page content |
| A/S Person in charge and telephone number | 데카트론 온라인 고객센터(상품/주문/배송문의) : 1800-2025 |